NDT Test Instruments PCE-VE 900N4 1.2 m / 4-way-head / Ø 2 mm
£ 9,979.00
Price excl. VAT &. delivery
2 year Warranty

The industrial borescope has a 1.2 m / 3.9 ft long endoscope cable. With a diameter of only 2 mm, cavities with the smallest access can be viewed with the help of this industrial borescope. The camera head of this industrial borescope can move freely in 4 directions.

  • Cable / head diameter: 2 mm
  • Direction of movement camera head: 4-way
  • Camera head length: 7 mm
  • Bending radius: 6 mm
  • 1.2 m / 3.9 ft endoscope cable
  • 5" monitor
  • Image and video memory
  • IP58 camera cable
  • 400 x 400 pixel image resolution

NDT Test Instrument PCE-VE 1500-22190
£ 20,670.00
Price excl. VAT &. delivery
2 year Warranty
Wireless

With this NDT test instrument, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the NDT test instrument consists of braided tungsten.

  • Diameter: Ø2.2mm / 0.08"
  • Cable length: 1m / 3.2 ft
  • Camera direction: 90°
  • Resolution: 160,000 pixels
  • Focusing range: 5 … 50 mm / 0.19 … 1.96"
  • 7" touch screen for easy operation
  • replaceable battery with status display
  • Storage of recording on SD card
  • Motor with endoscope cable can be changed quickly
  • HDMI connection for direct image transmission

NDT Test Instrument PCE-VE 1500-38209
£ 20,670.00
Price excl. VAT &. delivery
2 year Warranty
Wireless

With this NDT test instrument, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the NDT test instrument consists of braided tungsten.

  • Endoscope cable length: approx. 2 m / 6.5 ft
  • Diameter: 3.8mm / 0.15"
  • Camera resolution 160,000 pixels each
  • Viewing angle front camera 120°, side camera 90°
  • Focusing distance 5 … 50 mm / 0.19 … 1.96" each
  • Camera head length: 42 mm / 1.6"
  • Bending radius at 90° 35 mm / 1.3"
  • Live images from both cameras side by side
  • 7" touch screen for easy operation
  • Replaceable battery with status display
  • Storage of recording on SD card
  • Motor with endoscope cable can be changed quickly
  • HDMI connection for direct image transmission

NDT Test Instrument PCE-VE 1500-28200
£ 17,795.00
Price excl. VAT &. delivery
2 year Warranty
Wireless

With this NDT test instrument, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the NDT test instrument consists of braided tungsten.

  • Diameter: Ø2.8mm / 0.11"
  • Cable length: 2m / 6.5 ft
  • Camera direction: 0°
  • Resolution: 160,000 pixels
  • Focusing range: 5 … 50 mm / 0.19 … 1.96"
  • 7" touch screen for easy operation
  • Replaceable battery with status display
  • Storage of recording on SD card
  • Motor with endoscope cable can be changed quickly
  • HDMI connection for direct image transmission

NDT Test Instrument PCE-VE 1500-60500
£ 17,377.00
Price excl. VAT &. delivery
2 year Warranty
Wireless

With this NDT test instrument, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the NDT test instrument consists of braided tungsten.

  • Diameter: Ø6mm / 0.23"
  • Cable length: 5m / 16.4 ft
  • Camera direction: 0°
  • Resolution: 1MP
  • Focusing range: 5 … 50 mm / 0.19 … 1.96"
  • 7" touch screen for easy operation
  • replaceable battery with status display
  • Storage of recording on SD card
  • Motor with endoscope cable can be changed quickly
  • HDMI connection for direct image transmission

NDT Test Instrument PCE-VE 1500-38200
£ 17,039.00
Price excl. VAT &. delivery
2 year Warranty
Wireless

With this NDT test instrument, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the NDT test instrument consists of braided tungsten.

  • Endoscope cable length: approx. 2 m / 6.5 ft
  • Diameter: 3.8mm / 0.15"
  • Front camera with resolution: 1,000,000 pixels
  • Front camera viewing angle 120°
  • Focus 10 … 100 mm / 0.39 … 3.9"
  • Movable camera head 46 mm / 1.8" long
  • Bending radius approx. 35 mm / 1.3" at 90°
  • 7" touch screen for easy operation
  • replaceable battery with status display
  • Storage of recording on SD card
  • Motor with endoscope cable can be changed quickly
  • HDMI connection for direct image transmission

NDT Test Instrument PCE-VE 1500-60200
£ 14,707.00
Price excl. VAT &. delivery
2 year Warranty
Wireless

With this NDT test instrument, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the NDT test instrument consists of braided tungsten.

  • Borescope camera cable length: 2 m / 6.5 ft
  • Cable diameter: 6mm / 0.23"
  • Direction of view of the camera frontal
  • Camera resolution 1 million pixels
  • Camera viewing angle 120°
  • Focusing distance 10 … 100 mm / 0.39 … 3.9"
  • Flexible camera head length 60 mm / 2.3"
  • Radius at 90° bend 50 mm / 1.9"
  • 7" touch screen for easy operation
  • replaceable battery with status display
  • Storage of recording on SD card
  • Motor with endoscope cable can be changed quickly
  • HDMI connection for direct image transmission

Pressure Transmitter PCE-DMU 40
£ 507.00
Price excl. VAT &. delivery
2 year Warranty

The pressure transmitter PCE-DMU 40 can be used for relative and absolute pressure measurements. The pressure transmitter can be used for gases, water as well as fuels and oils.

  • max. 600 Bar
  • Media: gases, water as well as fuels and oil
  • Output: 4 … 20 mA / 0 … 10 V (selectable)
  • Pressure type: Absolute or Relative (selectable)
  • Membrane: stainless steel
  • Accuracy: 0.1 % / 0.25 % FSO

Data Logging Instrument PCE-830-2-ICA incl. ISO Calibration Certificate
£ 2,827.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The PCE-830 Data Logging Instrument is used for measuring one to three phases of electrical quantities for alternating current (AC). This Data Logging Instrument also measures such parameters as voltage, current, frequency, harmonics and power as well as indicating, according to standard EN50160, harmonic values, interharmonics and asymmetrics. Interference, such as interruptions, leaks, overloads or transience (from 16µs) are detected with their corresponding values.


  • PCE-830 + PCE-6802 amp clamp (1000 A)
  • Electrical conductor pick-up: 55 mm diameter / 2.2 in
  • Range selection: manual (10 A, 100 A, 1000 A)
  • Clamp dimensions: 244 x 97 x 46 mm / 9.6 x 3.8 x 1.8 in
  • Incl. ISO calibration certificate

Moisture Test Instrument PCE-MWM 200
£ 3,822.00
Price excl. VAT &. delivery
2 year Warranty

The moisture analyzer is a sensor for measuring moisture of sand and liquids consisting of a central probe surrounded by four other probes. The probes and sensor housing are made of stainless steel AISI 321. Our moisture analyzer is ideally suited for installation in tanks with liquid materials such as fuel oil, sludge from cement production, and fuels (CWF).

  • Readability mass fraction of water: 0 … 100 %
  • Moisture measurement range: 0.1 … 100 %water content in sand and liquids (water mass fraction)
  • Max. permissible absolute error moisture measurement: Varies by material, lab test required
  • Temperature range: +5 … +80 °C

Differential pressure Transmitter PCE-DDMU 10
£ 406.00
Price excl. VAT &. delivery
2 year Warranty
The pressure transmitter PCE-DDMU 10 can be used for gases and air. The pressure transmitter can be used for relative and differential pressure.

  • Max. ± 0.5% accuracy
  • Optional display
  • Switching outputs
  • Radiated output signal
NDT Test Instruments PCE-5000
£ 5,251.00
Price excl. VAT &. delivery
2 year Warranty

PCE-5000 is a portable hardness tester that uses the ASTM A1038 ultrasonic contact impedance (UCI) method to measure the hardness of metals and alloys with a minimum thickness of 2 mm / .08 in Non-destructive testing produces microscopic indentation.

  • Measurement according to ASTM A1038 ultrasonic contact impedance (UCI) method
  • Measurement units: Rockwell A (HRA), Rockwell B (HRB), Rockwell C (HRC), Brinell (HB), Vickers (HV) and MPa (N/mm²) SI units
  • Measurement ranges: 61-85.6 HRA, 41-100 HRB, 20.3-68 HRC, 85-650 HB, 50-999 HV, 255-2180 MPa (N/mm²)
  • Accuracy: ± 1.5 HR, ± 3% HB, ± 3% HV, Repeatability: ± 0.3%
  • Memory size: 1,000 groups for measurement data and 20 groups for calibration data
  • Different probe types (also automatic motorized probes) available

Pressure Transmitter PCE-DMU 10
£ 289.00
Price excl. VAT &. delivery
2 year Warranty

The pressure transmitter PCE-DMU 10 can be used for gases, water as well as fuels and oils. The pressure transmitter can be used for relative and absolute pressure measurements.

  • max. 400 Bar
  • Media: gases, water as well as fuels and oil
  • Output: 4 … 20 mA / 0 … 10 V (selectable)
  • Pressure type: Absolute or Relative (selectable)
  • Membrane: ceramic
  • Accuracy: 0.5 % FSO

Pallet Beams PCE-PTS 1N
£ 1,023.00
Price excl. VAT &. delivery
2 year Warranty

PCE-PTS 1N are heavy-duty pallet beams, hand pallet truck, pallet jack, warehouse, dock or floor scale used to weigh industrial shipments up to 2000 kg / 4409 lbs / 2.2 Tons. Save precious time by weighing your pallets of merchandise right on the pallet jack. Eliminate the use of a forklift to carry pallets of items to a separate scale for weighing. Weigh your goods right at the dock during loading or unloading.


  • Weighing range: 2000 kg / 4409 lb
  • Readability: 1 kg / 2.2 lb
  • Measurement uncertainty: ± 0.2% full scale
  • Note: These pallet truck scales must be assembled after delivery
  • These pallet truck scales can also be ordered mounted for an additional charge.   (see optional accessories)
  • Calibratable

Pallet Scale PCE-PTS 1N
£ 1,023.00
Price excl. VAT &. delivery
2 year Warranty

PCE-PTS 1N is a heavy-duty, hand pallet truck, pallet jack, warehouse, dock or floor scale used to weigh industrial shipments up to 2000 kg / 4409 lbs / 2.2 Tons. Save precious time by weighing your pallets of merchandise right on the pallet jack. Eliminate the use of a forklift to carry pallets of items to a separate scale for weighing. Weigh your goods right at the dock during loading or unloading.


  • Weighing capacity: 2000 kg / 4409 lbs / 2.2 Tons
  • Units of measure: kg or lb
  • Readability: Selectable, 0.0

Moisture Test Instrument PCE-MWM 220
£ 5,206.00
Price excl. VAT &. delivery
2 year Warranty

Moisture analyzer for liquid materials are used in boiler installations, water-dosing and diesel oil emulsion dispersion systems. The scope of supply can include the control cabinet to operate the valves regulating water feed. The moisture Analyzer for liquid materials has a processing unit with RS232/RS485 interfaces.

  • Measurement range: 0 … 100 % moisture in pumped liquids
  • Absolute error of the measurement: Δ= 0,035 +0,05·W
  • Temperature measurement range: -40 … +150 °C

Weighing Beam PCE-PTS 1N
£ 1,023.00
Price excl. VAT &. delivery
2 year Warranty

PCE-PTS 1N is a heavy-duty weighing beam, hand pallet truck, pallet jack, warehouse, dock or floor scale used to weigh industrial shipments up to 2000 kg / 4409 lbs / 2.2 Tons. Save precious time by weighing your pallets of merchandise right on the pallet jack. Eliminate the use of a forklift to carry pallets of items to a separate scale for weighing. Weigh your goods right at the dock during loading or unloading.


  • Weighing range: 2000 kg / 4409 lb
  • Readability: 1 kg / 2.2 lb
  • Measurement uncertainty: ± 0.2% full scale
  • Note: These pallet truck scales must be assembled after delivery
  • These pallet truck scales can also be ordered mounted for an additional charge.   (see optional accessories)
  • Calibratable

Power Meter PCE-830-2
£ 2,398.00
Price excl. VAT &. delivery
2 year Warranty

The PCE-830-2 Power Meter is used for measuring one to three phases of electrical quantities for alternating current (AC). This Power Meter also measures parameters such as voltage, current, frequency, harmonics, and power as well as indicating, according to standard EN50160, harmonic values, interharmonics, and asymmetrics. Interference, such as interruptions, leaks, overloads, or transience (from 16 µs) are detected with their corresponding values. The power logging instrument is delivered manufacturer calibrated. An ISO calibration certificate may be ordered optionally.


  • PCE-830 + PCE-6802 amp clamp (1000 A)
  • Electrical conductor pick-up: 55 mm / 2.1 in diameter
  • Range selection: manual (10 A, 100 A, 1000 A)
  • Clamp dimensions: 244 mm x 97 mm x 46 mm / 9.6 in x 3.7 in x 1.8 in
  • Sampling rate: 2 sec.
  • Memory size: 512 kB (max. 52,000 values (single phase)